General Settings:
Set up ESC mode, BEC Voltage and motor direction
in this panel.
If “store” panel is not crossed out, it means that a
parameter changed after last power up of the ESC.
After ESC setup or a change of a parameter, it is
necessary to write the settings to the ESC.
By selecting the “Store” panel and pressing “Store”
the ESC will restart and save all changed
parameters accordingly.
Additionally a round symbol next to the exit button
comes up after changing a parameter.
Page 15
-that's all! - Tribunus ESC are now ready to fly!
TRIBUNUS ESC AND MIKADO VBAR CONTROL/ VBAR NEO INTEGRATION
13.5 Scorpion Support App functions and features
Protection Limits: set up all protection limits to
match your usage (step 12.3)
Take note, that the ESC (as well as the BEC) will shut
down for a short time. Sometimes you will notice
a “Warmstart” of the VBar (LED flashing green/
purple, entry into the Eventlog).
ESC Settings:
If there is a panel crossed out, it means that the
settings are not used for the currently choosen ESC
mode set up in “General” panel. In this case “VBar
Govenor Mode” is activated, so there is no access to
Aircraft specific and Tribunus internal Govenor
settings. By changing the ESC mode, the needed
panels will be available accordingly. All parameters
of the PC software explained above are available in
this menus depending on the choosen ESC mode.
