Alarm Triggers
When the system is triggered, the siren will sound and the turn signal lights will flash. The
Transceiver’s LCD will display the following messages:
1.
If bike is bumped, the LCD will display
icon. The siren on the bike will sound for 5
seconds and the lights will flash. This cycle will repeat twice.
2.
If the perimeter sensor triggers a full alarm cycle, the LCD will display icon. The siren
on the bike will sound for 5 seconds. This cycle will repeat twice
(Note: The turn signal lights will not flash for a perimeter sensor trigger).
3.
If the bike is tilted, the LCD will display icon. The siren on the bike will sound for 30
seconds and the lights will flash. This cycle will repeat six times.
4.
If the ignition switch is turned on or tampered with, the LCD will display
Icon. The
siren on the bike will sound for 30 seconds and the lights will flash. This cycle will repeat
six times.
5.
With the optional back up system installed, the LCD will display icon if the main
harness or battery power supply is disconnected. The MCM will still continue to sound
and transmit from its internal power source. The siren on the bike will sound for 30
seconds. This cycle will repeat six times.
6.
The Transceiver will continue to flash the triggered icon until any button is pressed.
Note: The Transceiver will sound a unique tone to correspond with the triggered sensor
Sensor Memory Display
When the system is disarmed the turn signals will flash to indicate if there has been an alarm
trigger. The lights will flash once to indicate that the system has been disarmed, additional flashes
indicate that the following trigger has occurred:
1 flash then 1 additional flash
= Shock Trigger
1 flash then 2 additional flashes
= Tilt Trigger
1 flash then 3 additional flashes = Perimeter Sensor Trigger
1 flash then 5 additional flashes
= Ignition Trigger
Motorcycle Battery Safeguard with “sleep mode”
•
If the optional perimeter sensor is being used and the alarm is armed for more then 10 days
the system will automatically disable the perimeter sensor.
•
If the alarm is armed for more than 30 days, the system will automatically disable the systems
receiver. In this mode the transceiver will no longer be able to operate the system but the
system is still armed and protecting the bike.
•
To disarm, trigger the alarm, and press the #2 button.
7
