Selecting Auto/Manual Arming
Selecting Auto/Manual Arming
Enter the programming mode. Scroll to the icon and Press Button #1 to enter the arming
selection screen. The LCD will display the current setting ([Act] or [PAS]) and the siren will chirp
two or three times. To program follow these steps:
2. Press button
#4 to save and
exit
1. Press button 2 to
toggle between
the alert options
When entering the arming program mode, the siren and turn signals will confirm the current mode
•
Manual arming- siren chirps 2 times, lights flash 2 times
•
Auto arming- siren chirps 3 times, lights flash 3 times (In this mode the system will automatically arm
itself 60 seconds after the ignition is turned off)
Selecting Siren Tone and Alarm Duration
Enter the programming mode. Scroll to the icon and Press Button #1 to select. The screen will
display all of the sensor icons. To program follow these steps:
1. Press button
4 to scroll
between the
sensor icons
3. Press button 1 to
toggle between
sound and duration
5. Press button 4 to
save and exit
Tone Duration
In
Seconds
.
4. Press button 2
to adjust
to adjust
Adjusting the Accelerometer (Tilt/Shock) Sensor
Enter the programming mode. Scroll to the icon and press Button #1 to select. The screen
will display the current shock setting, and the siren will chirp 1-5 times to confirm sensitivity level. To
program follow these steps:
2. Press button 2 to adjust.
Siren will chirp to confirm
sensitivity level 1-5
1. Press button 1 to
toggle between
On/Off and
sensitivity levels
3. Press button 4
to save and exit
On/Off Sensitivity Level
2. Press button 1
to select sensor
icon
There are 5 siren tones
and 3 cycle duration
settings for each sensor
To test sensitivity bump motorcycle while in sensitivity adjustment mode, a siren chirp will indicate an alarm
trigger
10