Mobile Phone Support
iPhone/iPod touch/iPad
1. Download the free app from the app store
2. Launch the app on your device and enter your email and password
to log into your account.
Blackberry
1. Open your mobile browser to http://my.rlink.com.
2. Log into your account using your username and password.
3. Click the "Install Blackberry rLiNK Launcher" link at the bottom of the
page; this will install a quick launch icon on your BlackBerry desktop
allowing you to access your account with a single click
Android
1. Open your mobile browser to http://my.rlink.com.
2. Log into your account using your username and password, and
create a bookmark to the rLiNK site.
3. From your main device desktop, select the "Create Shortcut Icon"
option, and select the rLiNK bookmark you just created.
This adds an rLiNK browser launcher to your device desktop.
RSD-7
Starter Disable Installation Instructions
1.
Test the Engine control wire. (refer to options below)
2.
Attempt to start bike to test if correct wire is selected. If bike starts, the wrong wire is
selected. (contact Aritronix for assistance) If bike does not start, correct wire was selected
continue to step 3.
3.
Connect one end of cut wire to one of the blue-taped wires in RSD-7 with provided butt
connector or any other solid connection options.
4.
Connect second end of cut wire to second blue-taped wire in RSD-7 with provided butt
connector or any other solid connection options.
5.
Test connections to insure that they are as solid as possible. *
6.
Plug the RSD-7 connector into the matching connector on Main Control Module (MCM)
Accessory Harness.
7.
Test RSD-7 by activating alarm (without perimeter sensor) and try to turn on bike. If bike
turns on, please contact Aritronix for assistance.
* A loose wire could cause an accidental engine cut off
12
The Ignition / Engine control wire options:
Option #1: Power or ground wire on fuel pump (Fuel injected bikes)
Option #2: Wire running to the ignition fuse in fuse box. This should be
either a 10 or 15 amp fuse labeled
ign
or
start.
(Carbureted Bikes)
Option #3: Ground wire from ignition module
Option #4: Positive wire from ignition module to ignition coil.
Option #5: Wire connected between the Ignition module and engine stop button.
13
Blue
Blue
RSD-7
MCM
Note:
The RSD-7 adds a Starter Disabling feature, and will prevent
unauthorized
starting of the engine automatically when the system is armed.
Note:
For specific Instructions on individual bikes please call (800)428-0440 or for
international (480)951-1109.
