rLiNK Account Set Up
1. Go to
http://my.rLink.com
2. Click on "Register my device"
3. Enter the 15-digit IMEI number of your rLiNK.
4. Enter your 8-digit activation code.
5. Follow the prompts to create your account, modify settings, etc.
my.rLiNK.com Operation Instructions
rLiNK’s location reporting (tracking) is always on when the motorcycle is running or when
the system is armed.
Always arm the system when the motorcycle is not running to be fully
protected.
Signal Strength
Ignition On/Off
Motorcycle Battery
PerimeterSensor On/Off
Armed/Disarmed
To preserve the motorcycle’s battery, rLiNK will go into sleep mode 1 hour after the ignition
is turned off. Commands from your virtual remote will not work while the unit is in sleep
mode. Any alarm trigger, movement or turning on the ignition will wake up the system
and allow the virtual remote to function.
The PANIC button will sound the siren (if equipped) and flash the turn signals for 30
seconds or until armed/disarmed.
The LOCATE button with sound the siren (if equipped) and flash the turn signals for 5
seconds.
10
Tracking and Recovery
With current and historical reporting capabilities, rLiNK will report where your motorcycle is
and where it has been. In the case of theft, activating the emergency feature will
generate a PIN number that you can give to the police. The police can then log in with
that PIN and immediately locate the stolen vehicle.
In case of a verified theft scenario
only
, click the Activate Emergency button and follow
the prompts. Activating emergency mode will increase draw on the motorcycle’s battery.
Call the Police to file a theft report. Give them the PIN number and direct them to log in
at
http://my.rLink.com
to locate and recover the vehicle.
MCM Indicator Lights
Solid green light indicates GPS lock.
Fast blinking red light indicates rLiNK is
searching for cellular signal.
Slow blinking red light indicates rLiNK
has connected to cellular signal.
Blue light indicates rLiNK is receiving
over the air updates. Do not unplug
the MCM or turn on ignition while the
blue light is lit.
11
Note: To receive text message alerts, be sure to enter your phone number and service
provider and click the box marked “SMS Enabled”. Call Aritronix if your provider is not listed.
