GE 2000-65
WARNING! Read all instructions before operating the inflator
. Failure to follow all instructions listed below may result in
product damage, and/or serious injury.
SAVE THESE INSTRUCTIONS
WARNINGS:
1.
Read these instructions.
2.
Keep these instructions.
3.
Protect the cord from being walked on or pinched.
4.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way.
5.
Do
n’t disassemble the product. Incorrect reassembly may result in a risk of Short Circuit.
6.
Keep this product out of the reach of children.
DO NOT SUPPLY THE INFLATOR AT HIGHER OR LOWER VOLTAGE THAN NOMINAL. STD VOLTAGE IS 230 VAC, 50 Hz
GENERAL SAFETY RULES
1.
CONSIDER WORK AREA ENVIRONMENT.
Donʼt expose the device to heavy rain. Donʼt use in presence of flammable liquids
or gases.
2.
DONʼT ABUSE CORD.
Never carry device by cord or yank it to disconnect from receptacle. Keep cord from heat, oil, and
sharp edges.
3.
STAY ALERT.
Watch what you are doing. Use common sense.
4.
CHECK DAMAGED PARTS.
Before further use of the device, a guard or other part that is damaged should be carefully
checked to determine that it will operate properly and perform its intended function.
5.
DO NOT OPERATE
portable device near flammable liquids or in gaseous or explosive atmospheres.
6.
WARNING! RISK OF UNSAFE OPERATION.
Do not modify or attempt to repair. Never drill into or make any modifications to
the device or its attachments.
INTENDED USE
GE 2000-65 is a professional inflator designed for the inflation (and deflation) of big inflatable structures. This pump is suitable for outdoor
use.
1.
THE UNIT HAS A PROTECTION DEGREE
THAT
ALLOWS
TO
INFLATE
AND
OPERATE
EVEN
DURING
RAINING
CONDITIONS OR IN PRESENCE OF DUST.
2.
THE INFLATOR IS PROVIDED WITH HOSES
AND ADAPTORS TO BE CONNECTED TO
THE MOST COMMON INFLATION VALVES
3.
THE INFLATOR IS FITTED WITH TERMAL
OVERLOAD
SWITCHES
THAT
WILL
INTERVENE IN CASE OF OVERHEATING.
NORMAL OPERATION WILL RESUME
AUTOMATICALLY AFTER A PAUSE OF
20/40 MINUTES
