GE 2000-65
MAIN CHARACTERITICS
1.
Supply Voltage:
210-240 Vac; 50 Cycles
2.
Max. Power
2500 W
3.
Max pressure
200 mbar
(500 mbar with Booster)
4.
Max Flow rate
1200 l/min
(2500 l/min with Booster)
5.
Dimensions
L700; W250; H350 (mm)
6.
Mass
15 Kg
7.
Protection Degree
IP65 according to IEC standard 60529
USE OF GE 2000-65
TO INFLATE:
1.
Connect the Inflating tube to the Outlet Port of the GE 2000-65 and to the inflatable using the fittings provided.
2.
Connect the Power Supply Plug to a 230 Vac Socket
3.
Turn ON the Green Switch on the Inflator.
4.
Turn ON the Reed Switch to obtain the maximum
performance
5.
Switch off the Green Switch when the inflatable has reached
the desired pressure
CAUTION!
THE
INFLATOR
DOES
N’T
STOP
AUTOMATICALLY! IT’S NECESSARY TO CONTROL THE
DEVICE OPERATIONS IN ORDER TO AVOID THE DANGER
OF OVERINFLATION.
TO DEFLATE:
1.
Connect the hose to the Inlet port using the fittings provided.
2.
Turn ON the Green switch.
CAUTION! MAKE SURE THAT, DURING DEFLATION, THE UNIT WILL NOT OPERATE UNATTENDED. SWITCH OFF THE UNIT
WHEN NO AIR CAN BE EXTRACTED FROM THE INFLATABLE.
TROUBLESHOOTING
Problem
Possible cause
Possible Solution
GE 2000-65
doesn’t
start
Power cord not connected
Connect the cable correctly.
Main GREEN Switch OFF (0)
Turn the switch to ON. (1)
The power cord is damaged.
Replace or repair the cable from a SCOPREGA Service
Center.
Inflator Stop
Power cord not connected
Connect the cable correctly.
Main power Switch OFF
Put the switch to ON.
Over-temperature
Wait till the GE 2000-65 has cooled down. Operation will
resume automatically
ACCESSORIES
Recommended accessories for your GE 2000-65 are available from your dealer.
WARNING: USE OF ACCESSORIES NOT RECOMMENDED FOR THIS PRODUCT CAN BE DANGEROUS.
