DataTrack Waiter Call USA Version
DTKWCUSA 02/00
Issue 1
5
System Overview
The Scope DataTrack Waiter Call is a desktop radio transcoder that can be used to transmit numeric
and multi-call/pulsed vibrate messages direct to pocket pagers carried by individuals or entire groups.
The system has 14 individual call buttons that can transmit any of three different call types direct to
the user’s pager.
Options
1) Desk mount unit with right angle antenna.
Model DTUSAWCD
2) Wall mount unit with bracket kit and straight antenna.
Model DTUSAWCW
3) Both the above systems can also be ordered with Single Call (
S
) software*
* add
S
suffix to part number e.g.
DTUSAWCDS
Base Equipment type & description:
DataTrack Waiter Call, desktop paging transcoder
Transmitter FCC ID:
JRNUSADATALINK
Transmitting Frequency:
457.600 MHz or 457.575MHz*
Effective
Range:
Up to 1 mile with standard aerial
!
*or as specified on order documentation
!
optional external aerials and amplifiers available for greater range
Section 1: Installation
Location of the hardware
Desk mounted units
1 Fit the right angle antenna to the BNC connector at the rear of the unit. Twist the collar clockwise
until it locks into place. Ensure the antenna is in the upright position (see diagram 2, page 7).
2 Fit the power connector into the socket provided at the rear of the unit. Ensure this is pushed in as
far as it will go. Plug in the AC adaptor to a suitable mains (110V ac) wall outlet.
3 Check the location of the DataTrack unit, observing the recommendations detailed on page 6.
