Scooty DRIVE PRO, Оригинальное руководство пользователя

Страница: 17 / 22

17
EN
the actual battery level displayed will be most accurate when the device is
turned off.
4.2. INSPECTING AND MAINTAINING YOUR DEVICE
Your product requires routine inspection and maintenance. This chapter de -
scribes maintenance and operation steps. Before performing the following
operations, make sure that the power is off and that the charging cable is
unplugged. Before each use, carefully check:
• The tightness of the handles.
• That the wheels are functioning properly by lifting the device and running
the wheels idle.
• The column, the steering tube, nothing must prevent it from turning. The
entire steering system must be correctly adjusted and all connecting
elements and screws tightened and in good condition.
• Check the tightness of the screws, the front and rear wheels, shock
absorbers, and bonnet, and tighten again if necessary. These adjustments
may be needed because of vibrations caused by using the device.
• The condition of the tyres. Tyre pressure if the unit is equipped with air
wheels, and inflate as soon as is necessary using a bicycle pump or similar.
• The brakes, drum linings, brake pads, foot brake, depending on the unit. If
the unit is equipped with mechanical brakes (disc, drum, foot), ensure they
are not rubbing due to cable tension or exhibiting any other problems, as this
may cause the unit to slow down and prevent it from operating normally.
Overheating may impact the brake's efficiency.
• Check that the electric brake is functioning properly if the unit is equipped
with one.
If after adjusting you notice looseness that may affect your ability to drive
safely, or if an unusual noise appears, or a lack of fluidity is apparent, stop
using the unit and contact your dealer for more information or care.
If the product, a component, or the battery are worn out, please contact an
authorised service centre to repair or recycle your product.
4.3. CLEANING YOUR DEVICE
Follow these instructions and precautions for cleaning the device:
• Unplug all the device’s charging cables before cleaning it.
• Never immerse in water.
• Do not use a high-pressure cleaner, water jet or any other appliance or
washing method that would allow water to seep into the device.
• Clean the device with a sightly damp sponge or a soft cloth, avoiding the