Scooty DRIVE PRO, Оригинальное руководство пользователя

Страница: 11 / 22

11
EN
• To change modes: briefly press the speed change button (18) .
There are 3 speed modes:
• Mode 1 (pedestrian icon)
(21)
limited to 6 km/h
• Mode 2 (yellow S icon) (22) is the ECO speed mode and is limited to 15 km/h.
• Mode 3 (red S icon) (22) is the maxi mode and is limited to 25 km/h.
3.2. UNPACKING AND ASSEMBLING THE DEVICE
To unpack the product, it is recommended to have a clear surface that is
large enough to unpack and prepare the device. Take the device out of its
packaging, making sure to not injure yourself or damage other products or
your surroundings. Have someone help you if the product is too heavy for you
to handle on your own (the weight of the device is indicated on the packaging).
Before using the product, the handles must be assembled. To do this, unfold
the device (see following sections) and install the brake lever and the handles
as per the following instructions:
An adult must unpack and assemble the device.
1. Use the markings on the handles to help you. R marks the right-hand handle
and L marks the left-hand handle.
2.
Before screwing on the handles, install the brake lever
(3)
on the right hand
side and adjust the position of the brake lever by screwing it on once the
handles have been installed.
3. Install the starter key device (2) on the left handlebar before screwing on
the left handle, then tighten the starter key device so that the key is in a
horizontal position in relation to the ground and the key is facing you (see
diagram below).
4. Screw on each handle in alignment with the handlebar axis. Do not tighten
or apply force if the handle is crooked. It should be possible to tighten the
handle without applying force.
5. Ensure you have properly tightened the handle once it reaches the stop.