scooterxtras
.com.au
6.
ASSEMBLY
- FRONT MOUNT KIT LOCATION (Continued)
Once the outriggers have been fitted to the scooter, the front mount tube can be located:
(refer to sequence stated and shown below):
1. Reposition the outriggers to line
up with front mount tube.
2. Locate the tube onto the uprights.
3. Feed the bolt cover and saddle
washer onto the short bolt,
4. Pass the short bolt through
the hole in the front mount
tube and the upright,
5. Feed saddle washer onto bolt
and screw on nut to hold
all in place.
6. Using an Allen Key and
Spanner, tighten fastener
assembly.
(Close lid on bolt cover)
Repeat process for other fixing.
Mount Kit 1 shown
for illustration purposes
Front Mount Tube
Short Bolt
Bolt Cover
Saddle Washer
Saddle Washer
Nut
