scooterxtras
.com.au
8.
ASSEMBLY
- CANOPY PRE ASSEMBLY
The Canopy, Upper Windscreen and Rear frame require pre-assembly prior to fitting
(refer to sequence stated and shown below):
1. Position Canopy upside down - lay in box to protect cover from scratching,
2. Locate Upper Windscreen into frame on inside of Canopy,
3. Locate Rear Frame into frame on inside of canopy.
If required:
Using a rubber mallet - lightly tap
the Upper Windscreen / Rear Frame
down until fully located.
Canopy
Upper Windscreen
Rear Frame