Scolmore Click Smart Box Скачать руководство пользователя страница 2

Страница: 2 / 42

www.click-smart.com

Congratulations on purchasing the Click Smart Box (

CSB040

), an element of the Click

Smart control system.

This instruction manual provides information on installing and operating the smart box

and applications.

Only perform the Click Smart installation after becoming thoroughly familiar with this

manual and the system functions.

The applications enable control of Click Smart receivers mounted within range of the

smart box using radio frequency.

The smart device (phone or tablet) must be on the same Wi-Fi network and within

range of the router to ensure full functionality is achieved.

It is recommended only one smart device is used at a time to set up the smart box.

Setup data sent from multiple smart devices may cause the smart box to malfunction.

Signal Range Test

We recommend prior to commencing with any Click Smart installation, a basic signal

range test is carried out to test the transmission range through the variable building

and furniture materials, as these can have an influence in how the system performs.

Each receiver is supplied with an ‘installation guidelines’ sheet to help ensure any

potential installation issues are kept to a minimum. The installation guidelines sheet

can be downloaded from

www.click-smart.com/tech_specs.

When using the smart box for signal range testing, follow the installation procedures

in this manual. We recommend either to add the plug-in receiver (

RFSC-61

) to the

application and smart box and signal range test by controlling the socket throughout

the property ensuring it operates successfully at each location, or to test all the

receivers already installed and ensure they operate successfully.

In the event the receiver(s) do not operate in certain areas of the installation, the

solution may be to install a signal repeater (

RFRP-20/B

If a signal repeater is required, follow the repeater installation leaflet supplied.

Before you begin

Shipping & Disposal

Problem-free function of any Click Smart device also depends on the way it was

shipped, stored and handled. If you notice any signs of damage, deformation,

malfunction or missing parts, do not install and return it to the point of sale.

At the end of its service life, the product and its parts must be treated as electronic

waste. Before starting the installation, make sure that all wires and connected parts

are not under voltage. When assembling and performing maintenance, you must

uphold safety regulations, standards, directives and special provisions for working

with electrical equipment.

Contents

Installation Check List

Содержание Click Smart Box











































Результаты поиска

Содержание Click Smart Box

Отзывы:

Похожие инструкции для Click Smart Box

Бренды по названию

Популярные бренды

Scolmore Click Smart Box, Инструкция по установке и управлению

Результаты поиска

Содержание Click Smart Box

Отзывы:

Похожие инструкции для Click Smart Box

Бренды по названию

Популярные бренды