User Manual
Scion Tech
SC36.MX88
Page 19
Tel: +44 (0) 1635 862484
www.scion-tech.co.uk
8.10 Access Settings
●
Reset the administration and user passwords.
●
Lock and Un-Lock the front panel buttons.
Credentials
Front Panel Lock
Admin Password:
User Password:
admin
user
Version
GUI : V1.0.0
Firmware : V1.0.0
Confirm
Cancel
Switching
Audio
Config
CEC
RS232
Access
Interface
Network
●
Press the
STANDBY
button to enter or exit standby mode.
●
Switching inputs to outputs:- Press your desired
INPUT
button (2),
them press one or more
OUTPUTS
(3) or
ALL
followed by
ENTER
(4) to confirm your selection.
●
Examples:-
i. Switch input 3 to output 2:- Press
INPUT
3 followed by
OUTPUT
2, press
ENTER
to confirm your selection.
ii. Switch input 1 to outputs 1 and 4:- Press
INPUT 1
followed by
OUTPUT 1
then
OUTPUT 4
, press
ENTER
to confirm your
selection.
iii. Switch input 4 to all outputs:- Press
INPUT 4
followed by
ALL
,
press
ENTER
to confirm your selection.
●
To set the EDID to one or more source devices to the specification of
specific output:- Press the
EDID
button, then press the desired
INPUT
or the
ALL
button, then press the
OUTPUT
button associated with the
display you want to read EDID from, finally press the
ENTER
button to
confirm.
●
CLEAR:- Press the
CLEAR
button to clear incorrect entries.
9.0 IR Control
9.1 IR Remote Control