7. IR Control system
(IR Call-back of Matrix and Source Devices)
H
D
M
I
IR
T
X
IR RX
IR
R
X
IR
T
X
C
A
T
5
e
/6
/7
IR
P
a
th
IR
P
a
th
IR
P
a
th
H
D
M
I
"
#
$
%
The matrix is not only a switcher and extender
of multiple HDMI signals to multiple HDMI
receivers located remotely, it also passes IR
control signals through the IR call-back system
to the matrix and HDMI sources for full, indep-
endent control of all connected inputs from
output locations.
Two-way IR Call-back Between matrix, Sources
and displays from multiple locations.
A key feature on the matrix is discrete IR control
of the matrix, sources and displays from any
location – so inputs at the matrix end can be
controlled at a display location and displays can
be controlled at the matrix location. This is accomplished by placing a series
of IR Emitters on devices to control and IR Receivers at all locations you wish
to control from to enable the IR signal to travel both ways via the single Cat5e/
6/7 cable.
6/13
8
Connection Signal
Indicator Lamp
Illuminate: The Transmitter and Receiver
are in good connection status.
Flashing: The Transmitter and Receiver are
in poor connection status.
Dark: The Transmitter and Receiver are not
connected.
9
Data Signal
Indicator Lamp
Illuminate: The HDMI signal with HDCP.
Flashing: The HDMI signal without HDCP.
Dark: No HDMI signal.
