Video over IP Controller
admin
Log Out
RS232 Settings
Baud Rate:
115200
Stop Bits:
1
Parity:
None
Data Bits:
8
Apply
IP Settings
IP Address:
169.254.23.100
Subnet mask:
255.255.255.0
MAC Address:
Gateway:
Apply
B8:27:eb:21:c9:e7
169.254.23.1
DHCP:
Web Controller Password
New Password:
Apply
(Attention) Password must be 4 to 16 characters or digits
Web Controller Commands
Reboot
Reset to Factory Default
Commands
Send Commands
Clear Log
Log (only Displays the last 20 records)
2018-12-12 09:36: factory reset SUCCESS
2018-12-12 09:45: server set serial SUCCESS
2018-12-12 10:05: server set serial SUCCESS
Devices
Zones
EDID
Serial
IR
USB
Server
Update
Page 19
21. Server Settings
The server page displays some basic information about the controllers network and serial settings.
1. RS232 Settings - Here you can set the serial port of the controller including the baud rate, parity,
stop bits and data bits.
2. IP Settings - If the controller is set to DHCP status (ON) it will automatically be issued an IP address
from the router or DHCP server located on the LAN. If the DHCP is (OFF) you can set your own
static IP address and subnet mask. The controller will reboot if the DHCP setting is changed.
Tel: +44 (0) 1635 862484
www.scion-tech.co.uk
User Manual
SC08.CTL200
Scion Tech
