Page 5
6 Preparing your PC
Step 1:
Connect the SC08.MX11 controller, computer, transmitters and receivers to the Ethernet switch as
shown in Fig 2.
Step 2:
On your PC, go to
Control Panel > Network and Internet > Network Connections > Local Area
Connections
, right click on it and choose
Properties
.
Double click Internet Protocol Version 4 (TCP/Ipv4)
Choose “Use the following IP address”, for example 169.254.23.30 as your PC IP address, 255.255.255.0 as
the subnet mask, then click “OK”. Do not use the default IP address of the controller.
Tel: +44 (0) 1635 862484
www.scion-tech.co.uk
User Manual
SC08.CTL200
Scion Tech
