3.3 Selection Buttons
The selection icons simulate the switch (crosspoints). The are 16 channel icons running to to bottom
and 16 room icons from left to right. If your PRO-1001 is installed and connected to another Scion
matrix, the software will automatically increase the room numbers to suit your installation. The icons
are used to Force and Bar crosspoints.
3.4 Bar a room from individual channels
1. Click the “Bar” icon. If the “Force” icon was previously selected, the “Bar” icon will change colour
to red. Click the “Bar” icon again, the icon will now change to violet.
2. Click on a “Selection” icon to bar a room, the “selection” icon will change to red. The room is now
bared from the selected channel.
3. Repeat this operation for baring more channels.
3.5 Bar a room from all channels
1. Click the “Bar” icon. If the “Force” icon was previously selected, the “Bar” icon will change colour
to red. Click the “Bar” icon again, the icon will now change to violet.
2. Click the “Clear” icon under the room you wish to bar. All the “Selection” icons will changed to
red indicating all channels are bared.
3.6 Releasing a bared channel
1. Click the “Bar” icon. If the “Force” icon was previously selected, the “Bar” icon will change colour
to red. Click the “Bar” icon again, the icon will now change to violet.
2. Click on a “selection” icon to release the bared channel. The “Selection” icon will change to
green.
3. Repeat this operation for releasing more channels.
3.7 Releasing all channels
1. Click the “Bar” icon. If the “Force” icon was previously selected, the “Bar” icon will change colour
to red. Click the “Bar” icon again, the icon will now change to violet.
2. Click the “Set” icon under the room you wish to release all channels. All the “Selection” icons will
change to green indicating all channels are now released.
3.8 Force a room to a channel
1. Click the “Force” icon. If the “Bar” icon was previously selected, the “Force” icon will change coloour
to orange. Click the “Force” icon again, the icon will change to yellow.
2. Click on a “Selection” icon to force a room, the “Selection” icon will change to orange. This room is
now forced to the selected channel.
