SCINTREX ENVI-MAG, Руководство пользователя

Страница: 118 / 265

Operation
A5-10
ENVI-MAG Manual
18. At the Main operating display move to cursor to
ST: SEP:
19.
Enter!
10.
20. Move the cursor to
LN:
21.
Press
the “+” key to increment the line number to 18 N.
22. Take a reading and proceed along line 18 N toward the East.
23. At 10 W again, before you press the “RECORD” key,
Press
the “NOTE” key,
and then the “1” key.
24. After you have finished the line, move to Line 20 N and proceed to 50 E.
25. At the Main operating display move the cursor to
ST: SEP:
26.
Enter!
-10.
27. Move the cursor to
LN:
28.
Press
the “+” key to increment the line number to 20 N.
29. Proceed with Line 20 N.
Automating your measurements
There are two items which can be automated after each measurement:
▲ data recording,
▲
altering of the Station Number can take place automatically.
Caution:
Please note that repeat measurements will alter the Station Number and
possibly disrupt the correlation between location and data.
To enable both features do the following:
1. In the Instrument setup, move the cursor to
AUTO ST.INC.:
2.
Select!
YES
3. In the
mag setup
, move the cursor to
AUTO RECORD:
4. Select! YES
To operate as a total-field magnetometer in the Stop-and-Go mode, make the
following change in the
mag setup:
screen,
MODE: T-FLD