5
7” Square Hotplate
4.2 Display
Display area
Figure 5
Display
Descriptions
Display
area
When the heating function is switched ON and
rotate the stirring knob, LED displays the
temperature setting value and shifts to real value
in 5 seconds.
When the heating function is switched OFF and
the hotplate temperature is still above 50
℃
,
LED displays Hot, otherwise LED displays 0.
5.
Trial run
• Make sure the required operating voltage and power
supply voltage match.
• Ensure the socket must be properly grounded.
• Plug in the power cable
，
ensure the power is on and begin
initializing.
• Place vessel on the work plate.
• Set the target temperature and start heating.
• Stop the heating functions.
If these operations above are normal, the device is ready to
operate. If these operations are not normal, the device may
be damaged during transportation, please contact
manufacturer/supplier for technical support.
