SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT
Installation and Maintenance
4.1
Avoid placing the treadmill in direct sunlight, in areas of extreme
temperature or humidity or where the equipment may be splashed
with any fluid. This treadmill is intended for indoor use only. Position
the treadmill so the plug is easily accessible.
Allow a minimum of 20” (508mm) between the wall and other
treadmills when in use.
Allow a safety area of 79” x 36” (2000mm x 914mm) square around
the treadmill when in use.
The treadmill has wheels at the front of the machine attached to the
incline weldment assembly for easy handling.
These built-in wheels are designed for short distance relocation of the
treadmill, not for moving or delivery.
To move a short distance, incline the machine to 10%, then unplug
from the wall outlet, lift the rear of the treadmill and move.
CAUTION
:
*When moving the machine it is strongly recommended that two
people be used.
*Please use furniture dollys to move the treadmill longer distances.
After intense training, always clean your SCIFIT product. Perspiration that stays in contact with the frame, casing, and console may
cause rust or other damage. Clean surfaces with water and mild soap, then dry with a towel.
Follow the schedule below to maintain optimal performance of a SCIFIT treadmill
Treadmill Maintenance Schedule
Placement
Moving
Frame, Motor Cover,
Console
Damp Cloth
Daily
Facility
LCD Screen
LCD TV Screen soft
cleaning cloth
Daily
Facility
Inside Motor Cover
Vacuum
Monthly
Facility
Inspect Drive Belt
Visual - Cracks in
belt, Belt material
deteriation, etc..
Monthly
Facility
Inspect Walkbelt
Visual - Cracking,
Fraying, Belt slippage,
Replace if damaged
Monthly
Facility
Inspect Walk Deck
Visual - Wear on
the deck, Cracks,
Replace if Damaged.
Flip once a year
Monthly
Facility
Front/Rear Rollers
Damp cloth.
Replace if Damaged
As Needed
Facility
Actuator Elevation
Screw Shaft
General purpose
grease
Annually
Facility
Component Use When By Whom
