Scientifica MTP, Ручная настройка

Страница: 9 / 17

3.0 Initial Setup |5
3.1.2 Setting the correct length of your platform leg
It is essential that you ensure the legs are all the
same height. Any differences in leg length will reduce
the smoothness of the stage motion and damage the
bearings.
It is important to ensure that the platform height is set to correct focal
point of your microscope. For a Scientifica SliceScope the height is 219
mm. (This information should be supplied by your microscope
manufacturer – Olympus, Zeiss, Leica, Nikon).
Figure D: Setting the platform height
Once you have decided on the correct height, unscrew the legs to the
desired length. Use the digital callipers to ensure that all of the MTP legs
are the same length.
Tighten the locking ring to ensure that the height does not change.
3.1.3 Attaching the legs and feet
Bolt the feet to the legs using the supplied leg bolts with the 10 mm allen
key. Align the legs with the XY stage and bolt firmly together with the 10
mm allen key.
M
e
a
s
u
re
t
h
is
h
e
ig
h
t
Locking Ring
Make sure
adjustable screws
are at the top