1. E�ercise C�UTION when emptying hot bath liquids.
2. Store and dispose of the used bath liquid according to the laws for
environmental protection.
3. Some parts of the bath cover and the pump connection may
become e�tremely warm or cold during continuous operation.
E�ercise particular caution when touching these parts.
4. Never operate the unit without sufficient fluid in the bath.
5. Employ suitable connecting tubing. Make sure that the tubes are
securely attached. �void sharp bends in the tubing. Regularly
check the tubing for material defects. Insulate the tube to
prevent e�cess condensation
6. �hen you have finished the application� it is recommended to
keep on circulating the liquid in the bath or system for some time.
Simultaneously set the working temperature to +20 C to allow
the temperature in the system to decrease slowly. In this way
fractional over-heating of the bath liquid is prevented.
SAFETY RECOMMENDATIONS
LEGEND
DESCRIPTION
P�RT NUMBER
F1
INLINE FUSE
1-RF-261
S1
M�INS S�ITCH
1-17T�F
M1
PUMP MOTOR
1-RF261
CT1
CONTROLLER
1-TCD-103
SSR1
SOLID ST�TE REL�Y
1-SSR-40�
E1
ELEMENT 1000�/230V
1-1000�-170
S2
COOLING M�IN S�ITCH
1-17T�F
M2
F�N MOTOR
1-CF-170
CP1
COMPRESSOR
1-COMP-170
WIRING DIAGRAM
MODEL: COOLING BATH
MODEL CODE: 170
6
9
