T
ROUBLESHOOTING
T
ROUBLESHOOTING
MESSAGE
SOLUTION
The C
2
D Digital Microscope is not connected to
the computer.
Connect the C
2
D Digital Microscope to the
computer.
If the problem still exists, you have to remove
the C
2
D Digital Microscope device driver and
install it again. (Please consult Windows
®
User
Guide).
Out of memory.
Please exit other software to free up more
memory.
Cannot turn on the light.
Please refer to the section "Care & Maintenance"
to replace the bulb.
Error found when loading image into the memory.
Run ScanDisk to check your hard disk for logical
and physical errors. ScanDisk can then repair
the damaged areas of your hard disk.
Reinstall the C
2
D software.
Video recording feature is not available.
Your computer does not have a default printer.
Please check your computer whether an
appropriate printer is installed onto your
computer.
Cannot initialize clipboard.
Please exit other software to free up more
memory.
14
P38-MS288-810010001
Support e-mail address:
