Hydrim L110w Service Guide 95-109977-1
…
9
Adding Water Softening Salts
If you have to set the water softener to any setting above 0, the message “Salt Level Low” will appear
on the display.
To add water softening salts follow these steps:
Unscrew the salt container lid.
Upon first use of the Hydrim L110w, pour
approximately 1 liter (1 quart) of water into the salt
container, or until it is full with water. It is not
necessary to add water during subsequent refills of
the salt container.
Replace the salt container lid.
After salt has been added to the unit, the softening salt indicator will initially indicate salt needed. The
indicator will turn off when the salt solution has become sufficiently concentrated.
Installation Test
Turn on the shut-off valves. Run a test cycle, checking for leaks. (See Operating Instructions)
Routine Maintenance
Daily
Filter
Inspect the filter inside the chamber.
To remove filter, lift filter and turn 90 degrees.
Wash arms
filter
