SCI CEO-24-HC22 Series, Руководство пользователя

Страница: 4 / 32

4
2. Installation Instructions
A. Separate the front panel from back panel by
depressing the two tongues located in the bottom and
in the left of the unit.
B. Gently disconnect the quick connector on the back
panel.
C. Line the back panel up against the wall or flat surface
on to which it is to be mounted and drill in the
appropriate fixing holes.
D. Insert screws so they extend approx. 3/16" (3 mm)
from wall or surface.
E. Align the back panel against these screws, pushing it
forward, allowing it to slide downwards to lock into
position.
F. Make electrical connections to terminals on the back
panel as shown on enclosed electrical wiring diagram.
G. Reconnect the quick connector into the back panel
H. Re-assemble front and back cover. Connect at top first
then at bottom.
I. Reset the thermostat to its default settings (see
#11.1).
Spring
tongue
1
Spring
Tongue
2
Screw
3
Screw
1
Screw
2
Quick
connector
Front plate
Back plate