background image

30

Warranty

Who Is Covered

This warranty is valid only to the original purchaser and is not transferable or applicable to any other 

person(s).

What Is Covered

Nautilus, Inc. warrants that this product is free from defects in materials and workmanship, when used for 

the purpose intended, under normal conditions, and provided it receives proper care and maintenance as 

described in the Product’s Assembly and Owner’s manual.  This warranty is good only for authentic, original, 

legitimate machines manufactured by Nautilus, Inc. and sold through an authorized agent and used in the 

United States or Canada. 

Terms

• 

Frame  

 

5 years 

• 

Mechanical parts  

1 year

• 

Electronics 

 

1 year

• 

Labor  

 

90 days 

           (Labor support does not include the installation of replacement parts involved in the initial product 

assembly and preventative maintenance services.)

How Nautilus Will Support the Warranty

Throughout the terms of the warranty coverage, Nautilus, Inc. will repair any machine that proves to be 

defective in materials or workmanship. Nautilus reserves the right to replace the product in the event 

a repair is not possible. When Nautilus determines replacement is the correct remedy, Nautilus may 

apply a limited credit reimbursement toward another Nautilus, Inc. brand Product, at our discretion. This 

reimbursement may be prorated based on length of ownership. Nautilus, Inc. provides repair service within 

major metropolitan areas. Nautilus, Inc. reserves the right to charge the consumer for travel outside these 

areas. Nautilus, Inc. is not responsible for dealer labor or maintenance charges beyond the applicable 

warranty period(s) stated herein. Nautilus, Inc. reserves the right to substitute material, parts or products 

of equal or better quality if identical materials or products are not available at the time of service under this 

warranty. Any replacement of the product under the terms of the Warranty in no way extends the original 

Warranty period. Any limited credit reimbursement may be prorated based on length of ownership. THESE 

REMEDIES ARE THE EXCLUSIVE AND SOLE REMEDIES FOR ANY BREACH OF WARRANTY.

What You Must Do

• 

Retain appropriate and acceptable Proof of Purchase.

• 

Operate, maintain, and inspect the Product as specified in the Product Documentation (Assembly, 

Owner’s Manuals, etc.).

• 

Product must be used exclusively for the purpose intended.

• 

Notify Nautilus within 30 days after detecting an issue with the Product.

• 

Install replacement parts or components in accordance with any Nautilus instructions.

• 

Perform diagnostic procedures with a trained Nautilus, Inc representative if requested.

What Is Not Covered

• 

Damage due to abuse, tampering or modification of the Product, failure to properly follow assembly 

instructions, maintenance instructions, or safety warnings as stated in the Product Documentation 

(Assembly, Owner’s Manuals, etc), damage due to improper storage or the effect of environmental 

conditions such as moisture or weather, misuse, mishandling, accident, natural disasters, power 

surges.

• 

A machine placed or used in a commercial or institutional setting.  This includes gyms, corporations, 

work places, clubs, fitness centers and any public or private entity that has a machine for use by its 

members, customers, employees or affiliates.

• 

Damage caused by exceeding maximum user weights as defined in the Product’s Owner’s manual or 

warning label.

Содержание Classic Cruiser

































Отзывы: