background image

24

Read all maintenance instructions fully before you start any repair work. In some 

conditions, an assistant is necessary to do the necessary tasks.

!

Equipment must be regularly examined for damage and repairs. The owner is 

responsible to make sure that regular maintenance is done. Worn,  damaged 

or loose components must be repaired or replaced immediately. Only 

manufacturer supplied components can be used to maintain and repair the 

equipment.
If at any time the Warning labels become loose, unreadable or dislodged, 

contact Nautilus Customer Service for replacement labels.

Daily: 

Before each use, examine the exercise machine for loose, broken, 

damaged, or worn parts. Do not use if found in this condition. Repair or 

replace all parts at the first sign of wear or damage. Make sure adjust

-

ment clamps are tight. Tighten as necessary. After each workout, use a 

damp cloth to wipe your machine and Console free of sweat.

Note:

 Avoid excessive moisture on the Console.

Weekly: 

Clean the machine to remove any dust, dirt, or grime from the surfaces. 

Check for smooth seat and handlebar operation. If needed, sparingly 

apply a thin coating of silicone lube to ease operation.

!

Silicone lubricant is not intended for human consumption. 

Keep out of reach of children. Store in a safe place.

Note:

 Do not use petroleum based products.

Monthly  

or after 20 

hours: 

Check pedals and crank arms and tighten as necessary. Make sure all 

bolts and screws are tight. Tighten as necessary. 

 NOTICE:

   Do not clean with a petroleum based solvent or an automotive cleaner. 

Be sure to keep the Console free of moisture.

Maintenance

Содержание Classic Cruiser

































Отзывы: