Schwinn 12in Tiger Скачать руководство пользователя страница 10

Страница: 10 / 67

BEF

ORE Y

OU RIDE

ASTM CONDITION 1

“This is a set of conditions for the operation of a bicycle on a regular paved or smooth surface where

tires may unitentionally lose ground contact.”

INTENDED

To be ridden on paved roads only.

NOT INTENDED

For off-road, cyclocross, or touring with racks or panniers.

MAXIMUM WEIGHT LIMIT

1, 3

RIDER (lbs/kg)

LUGGAGE (lbs/kg)

TOTAL (lbs/kg)

275/125

10/4.5*

285/126

ASTM CONDITION 1

ROAD TANDEM

“This is a set of conditions for the operation of a bicycle on a regular paved or smooth surface where

tires may unitentionally lose ground contact.”

INTENDED

Road tandems are designed to be ridden on paved roads only. They are not designed for mountain

biking or off-road use. Road tandems are designed for touring with racks and panniers.

NOT INTENDED

Road tandem should not be taken off-road or used as a mountain tandem.

MAXIMUM WEIGHT LIMIT

1, 3

RIDER (lbs/kg)

LUGGAGE (lbs/kg)

TOTAL (lbs/kg)

500 / 227

75 / 34

575 / 261

ASTM F2043

Suitable for

road riding

(only)

CHILD BIKE

These bikes are designed for children riding where parental supervision isalways required. Riders

shall avoid areas used by automobiles, as well as inclines, curves, stairs, or areas near drop-offs

or pools.

• Maximum seat height of 68mm; generally, bicycles with16” or 20” wheels, and kids’ tricycles

• No quick-release wheel fastening systems

• Weight limit: 80 lbs (36 kg)

Содержание 12in Tiger




































































Результаты поиска

Содержание 12in Tiger

Отзывы:

Похожие инструкции для 12in Tiger

Бренды по названию

Популярные бренды

Schwinn 12in Tiger, Руководство пользователя

Результаты поиска

Содержание 12in Tiger

Отзывы:

Похожие инструкции для 12in Tiger

Бренды по названию

Популярные бренды