Schweißkraft VarioProtect PANORAMA-W R-TC, Руководство по эксплуатации

Страница: 19 / 22

Spare Parts
VarioProtect PANORAMA - Serie | Version 2.02 | EN 19
16 Spare Parts
16.1 Ordering spare parts
The spare parts may be purchased with the authorised
dealer or directly with the manufacturer. Please find the
corresponding contact data in Chapter 1.2 Customer
service.
Indicate the following basic information for requests or
orders of spare parts:
- Type of device
- Item number
- Position number
- Year of construction:
- Quantity
- Required mode of dispatch (mail, freight, sea, air,
express)
- Address of dispatch
Spare part orders which do not include the above indica-
tions may not be taken into consideration. If the indica-
tions regarding the mode of dispatch are missing, the
product is dispatched at the discretion of the supplier.
You will find information regarding the device type, item
No. and year of manufacture on the type plate fixed to
the welding helmet.
Example
The outer pane for the welding helmet VarioProtect PAN-
ORAMA-W S - TC must be ordered. The outer pane has
the position number 18 in the spare parts drawing 1.
When ordering spare parts, send a copy of the spare
parts drawing (1) with the marked component (outer
pane) and marked position number (18) to the authori-
sed dealer or the spare parts department and provide the
following information:
Type of device: VarioProtect PANORAMA-W S - TC
Item number: 1654060
Drawing number: 1
Position number: 18
The item number of your device is:
VarioProtect PANORAMA-W S - TC 1654060
VarioProtect PANORAMA-W R - TC 1654070
DANGER!
Danger of injury by the use of
wrong spare parts!
Dangers may result for the user and damages as
well as malfunctions may be caused by using wrong
or damaged spare parts.
- Only use original spare parts of the manufacturer or
spare parts admitted by the manufacturer.
- Always contact the manufacturer in case of uncer-
tainties.
Tips and recommendations
Use of non-approved spare parts will invalidate the
manufacturer's warranty.