19
USER MANUAL HG1000 532
4. CENTRAL UNIT
4.1. Central unit in detail
RESET button
This is located in the battery compartment on the rear side of the central unit. With this button, the factory set-
tings can be reset. To do this, firstly press the
RESET
button and then enter the standard PIN
“1-2-3-4”
followed
by the
button.
4.2. Background lighting as a status display
The display lighting also serves as an additional status display. From here, the mode that the system is currently
in can be checked from larger distances.
Overview of the individual modes
ARM
Situation 1
Situation 2
One zone sets off the alarm in
ARM mode
Setting the alarm in
ARM mode
Characteristics
• The alarm sounds for 1 minute
(Standard settings – can be set from 1-6 minutes)
• The alarm centre
flashes red every 2 seconds
• The zone that is set off is shown in the display
through flashes
• The alarm is ended by the entry of a 4-digit PIN as
well as by additional confirmation with
Characteristics
• The siren is not set off
• The alarm centre
flashes red every 5 seconds
(Display of the standby)
HOME
Situation 1
Situation 2
One zone sets off the alarm in
HOME mode
One zone sets off the alarm in
ALERT mode
Characteristics
• The alarm sounds for 1 minute
(Standard settings – can be set from 1-6 minutes)
• The alarm centre
flashes red every 2 seconds
• The zone that is set off is shown in the display
through flashes
• The alarm is ended by the entry of a 4-digit PIN as
well as by subsequent confirmation with
Characteristics
• A doorbell noise is set off
• The alarm centre
flashes green every 2 seconds
• The zone that is set off is shown in the display
through flashes
• To end the doorbell noise, simply press
LCD display
Keypad
