Schwaiger DAB 200, Инструкция по эксплуатации

Страница: 20 / 24

20
USER MANUAL DAB 200
3. Use the or key to find the <SW Version> option and press ENTER to review.
6. FM MODE
1. Switching from DAB to FM
Press the DAB/FM button to switch to FM mode. The display will show „FM Mode“, the radio will
then automatically tune to the nearest available station.
6.1 Scan setting
There are two types of scan, you can select it by long pressing INFO/MENU > Scan setting >All
stations / strong stations only
• Strong stations only: will only stop at stations with a strong signal.
• All stations: will stop at any station found with a strong or weak signal.
The name of the station will appear on the top line of the display if the RDS (radio data system)
is available. Otherwise the frequency will be displayed. On the bottom of the display, it will show
the station information.
6.2 Display modes
Every time you press the INFO/MENU button, the display will cycle through the following display
modes:
Scan setting •
< All stations >
Note! Press or button to select the previous/next option. Press ENTER
button to confirm.
Radiotext
As with DAB, the broadcaster can include a scrolling text that displays information about the
current program. lf Radiotext information is not available, then the display will show <No Text>.
7. SYSTEM SETTINGS IN FM MODE
7.1 Full Scan
To search for a FM station, you need to long press and then release the SCAN button. Once
a station has been found, the scanning will stop automatically. lf no station is found,then the
tuning will stop once it has cycled through the entire FM band (87.5–108 MHz) .
7.2 Audio setting
You can choose between mono or stereo reception (if available). Select the audio format by long
press INFO/MENU <Audio setting> <Forced mono> or <Stereo allowed> Forced mono
can be useful if you have a weak signal and want to avoid noise.