Schwaiger DAB 200, Инструкция по эксплуатации

Страница: 16 / 24

16
USER MANUAL DAB 200
3.3 Set sleep time
1. To set the sleep time, continuously press the SLEEP button to select from Sleep off, 15
minutes, 30 minutes, 45 minutes, 60 minutes, 90 minutes.
2. When the time runs out, the radio will enter standby mode.
4. DAB MODE (DIGITAL RADIO)
To switch to DAB mode press the DAB/FM button.
4.1 Program selection
Use the or button to cycle through the DAB programs. Press the ENTER button to enter the
current program Once you have reached the last station in the found ensemble, it will revert
back to the first station again.
4.2 Full scan
To perform a Full scan, press and hold the INFO/MENU button for 3 seconds. When the <Full
Scan> option appears press the ENTER button.
4.3 Manual tuning
You can manually tune the receiver. This can help you aligning your aerial or when adding sta-
tions that were missed while auto tuning.
1. Press and hold the INFO/MENU button for 3 seconds.
2. When the <Full scan> option appears press either or button and find <Manual
tune>, then press ENTER button.
3. Use the or button to cycle through the DAB channels, which are numbered from 5A to
13F.
4. Now press the ENTER button to enter the current multiplex. The top line will now display
the multiplex name (if received) and the signal strength is indicated by the bars below.
Adjust your aerial so that more full bars are displayed. lf you wish to exit the manual tun-
ing mode, press the ENTER button.
4.4 Display modes
Every time you press the INFO button,the display will cycle through the following display modes:
The information is displayed on the lower segment of the LCD display.
• DLS * (scrolling text with artist - title
a.o.)
• signal strength
• program type
• ensemble/multiplex
**
• frequency
• signal error rate
• audio data rate and compression
• time
• date