Schwaiger DAB 200, Инструкция по эксплуатации

Страница: 19 / 24

19
USER MANUAL DAB 200
5. The next step is to set the volume Ievel you require. Use the or button to set, then
press the ENTER button to activate the alarm.
To disable the alarm, return to the <Alarm> interface and use the or button to choose OFF
and press ENTER button to save. To silence the alarm when sounding, press the ENTER button
or press and hold the SLEEP button.
Note! In standby mode the alarm icon will be displayed when activated.
5.5 Prune
When the radio has performed a scan in several locations you may find there are stored sta-
tions that you can no Ionger receive. This function automatically removes them from the stored
station Iist.
1. Press and hold the INFO/MENU button for 3 seconds.
2. When the <Full scan> option appears press either or button and find <Prune>,
press the ENTER button.
3. Use or button to select YES or NO and press ENTER button to select. All DAB stations
will be cleared.
5.6 DRC (Dynamic range control)
This causes the radio to reduce the dynamic range of the audio signal. The purpose of this is to
adapt the dynamic range of the audio signal to listening in a noisy environment.
Note! This is not available on many DAB stations.
1. Press and hold the INFO/MENU button for 3 seconds.
2. When the <Full scan> option appears press either or button and find <DRC>, then
press the ENTER button.
3. Choose between DRC Off, DRC Low and DRC High.
4. Press ENTER button to save the setting.
5.7 Factory reset
To reset the radio to the factory settings follow the below steps.
1. Press and hold the INFO/MENU button for 3 seconds.
2. When the <Scan Setting> option appears press one of the buttons repeatedly until
you find <System>, then press the ENTER button. Please note that once the reset has
taken place, you will lose all your stored presets both DAB and FM and the internal DAB
registry.
5.8 Software Version
To check your software version.
1. Press and hold the INFO/MENU button for 3 seconds.
2. When the <Scan Setting> option appears press either or button to select <System>, then
press the ENTER button.