30
OPERATING MANUAL STIMAWELL® 120MTRS EN
Please Note:
Deviations in the intensity values of two opposing longitudinal channels can, in
some circumstances, necessitate more intensive diagnosis or greater attention to the therapy
and the program selection process.
9.2.4
Selecting The Therapy Mode
Having completed the calibration you can now decide if you want to carry out the therapy for
your patient in the mode
Automatic Program Selection Based On Indications
or in the mode
Manual Program Selection
.
In the mode
Automatic Program Selection Based On Indications
you enter the anamnestic
data for your patient in the StimaWELL
®
120MTRS System. The system then determines the
correct therapy program automatically and will adjust from session to session according to the
condition of your patient.
In the mode
Manual Program Selection
you
can re-select the therapy program for each
session. Here also is the composition of a
program list with preferred programs possi-
ble.
Please Note:
If, in isolated cases, the
Au-
tomatic Program Selection Based On Indica-
tions
does not invoke a sufficiently compati-
ble and efficient program then, of course,
you can as an alternative always resort to the
Manual Program Selection
mode.
Therapy in the mode “Automatic Program Selection Based On Indica-
9.2.4.1
tions”
Touch in the window
Select Therapy Mode
on
Automatic Program Selection Based On
Indications
. You can now select which of the
three therapeutic actions
Pain Therapy
,
Muscle Therapy
and
Dynamic Deep Massage
you wish to implement.
In the following we should like to explain in
detail what the measures
Pain Therapy
en-
tails. We will then explain the measures in
respect of
Muscle Therapy
and
Dynamic Deep Massage
.
Please Note:
Please note that in the mode
Automatic Program Selection Based On Indica-
tions
only one therapy cycle can be carried out per patient and which can be compiled from an
optional number of sessions. If you want to start a new therapy cycle for your patient, the
previous cycle will be discontinued.