OPERATING MANUAL STIMAWELL® 120MTRS EN
19
Changing View
6.4
If your patient is experiencing the electrical current on individual channels as being
too powerful or too weak, you can, during the therapy, select individual channels
and set their proportional intensity. However, it is recommended to use
Changing
View
only for fine tuning during the therapy and after you have already implemented a cali-
bration for your patient. More on calibration can be found in Section 9.2.3.
How and in what circumstances you can best use
Changing View
can be found in Section 10.
Therapy With The StimaWELL
®
120MTRS
6.5
Once you have completed all the settings you can begin with the therapy. It is recommended
to create a patient profile which contains the settings for that particular patient. A profile
which has once been created can simply be selected for future sessions. The settings saved
under the profile are loaded automatically so that therapy can begin without further time
consuming preparations. In addition, you are able to input required anamnestic data in the
patient profile and thereby automatically create a therapy plan with a program which is
matched to the needs of your patient. More on the mode
Automatic Program Selection Based
On Indications
can be found in Section 9.2.4.1.The progression of the therapy with the Sti-
maWELL®120MTRS in the mode
Automatic Program Selection Based On Indications
is auto-
matically documented in the StimaWELL®120MTRS Control Unit and can therefore at all times
be recalled and evaluated. All important information on patient profiles can be found in Sec-
tion 9. Everything you need to know regarding the creation of patient profiles can be found in
Section 9.2.
The therapy starts with the selected program. More information regarding changing the pro-
gram group can be found in Section 7. Turn the rotary/pressure
controller in a clockwise direction to start the therapy and to
increase the intensity. Turning the controller in an anti-clockwise
direction decreases the intensity. The intensity display changes
accordingly. You can also change the intensity by first touching on
the display
Intensity
and then by touching on the [+] and [-] but-
tons. As an alternative, your patient can set his/her own intensity
level independently by depressing the arrows on the remote
control.
In the display
Stimulation Time
you see the remaining stimulation
time and the actual program sequence as well as the total num-
ber of sequences with which this program is comprised. By touch-
ing on the display
Stimulation Time
you can change between the
backwards and forwards running time.
