C1000 & C2000 Assembly Instructions
17
www.schuttsports.com
800-426-9784
Backboard Attachment
Backboard and Rim Leveling
Step 1:
Lift backboard assembly
(1)
up
and insert extension post
(2)
between
slider post brackets
(3)
. Align
extension post rear holes with slider
post bracket top rear holes.
Step 2:
Insert 1/2" x 3-1/2" bolt
(4)
through holes and attach nut. Tighten
nut and verify that backboard assembly
pivots freely. Loosen nut as needed to
allow pivot action.
Step 3:
Pivot backboard assembly up
and align extension post holes
(5)
with
slider post bracket holes.
Step 4:
Insert 1/2" x 3-1/2" bolt through
holes, and attach washer and black
knob
(6)
. Hand tighten knob.
Step 5:
Insert 5/16" x 3-1/2" bolt through
backboard frame and extension post,
and attach nylock nut. Snug tighten nut.
Step 6:
Remove strap that holds slider
post in place.
Step 1:
Verify that backboard is level
horizontally and vertically and that goal
is level horizontally using a carpenter's
level. If adjustments are necessary,
proceed to next step.
NOTE:
Backboard and goal leveling
requires the loosening and then the
retightening of different backboard,
brace, and goal hardware
combinations.
Step 2:
First, loosen appropriate
hardware, and level backboard and
goal horizontally.
Step 3:
Second, loosen appropriate
hardware, and level backboard
vertically by adjusting braces.
Step 4:
Tighten all fasteners and attach
net to rim.
1
3
2
4
5
6
