C1000 & C2000 Assembly Instructions
11
www.schuttsports.com
800-426-9784
Unpacking - C1000
Fully loaded pallet weighs 352 lbs (160 kg) and is
difficult to handle. To prevent serious injury, a
suitable lifting device must be used to remove
pallet from truck.
Slider post is spring loaded and can extend
rapidly. To prevent serious injury, do not cut strap
that holds slider post in place or loosen lock
handle (1) for height adjustment handle until
instructed to do so.
Step 1:
Remove pallet from truck, and
place it on a level surface. Use of a fork
lift is recommended.
Step 2:
Carefully remove wrapping and
banding materials.
Step 3:
Remove goal, lower and upper
padding, backboard, backboard braces
with attached goal hardware, and
optional backboard padding.
Step 4:
Unpack all boxes and lay parts
out. Remove goal hardware from
backboard braces and place with goal.
Step 5:
Remove and retain screws on
unit's side covers that secure unit to
pallet.
Step 6:
Remove and retain screws that
are attached to tape going through
brake feet
(2)
.
Step 7:
Push two brackets down to
raise brake feet
(2)
and lower wheels.
Step 8:
This step requires three
adults—two to handle unit and one to
remove pallet. Roll front wheels of unit
off of pallet; tilt unit forward on front
wheels; remove pallet and then lower
unit down on four wheels.
1
2
