Assembly
26
02.00|WDB 99 |en
The WDB 99-60 base module allows further change components of
the modular system to be adapted to the workpiece direct clamp-
ing. The change interface of the clamping system has a central
connection screw for clamping an adaptable stacking module or a
workpiece direct clamping or compensation module.
The WDB 99-60 base module has three air supply connections
G 1/8". The air supply is intended to supply a VERO-S workpiece
direct clamping module or a WDB compensation module with
pneumatic actuation. The unlocking connection and the turbo con-
nection can be found on the front side. The turbo connection serves
to amplify the pull-in force on the quick-change pallet system. On
the back there is an air connection for the air control to the WDN
99-70. Via the integrated air forwarding to the change interfaces, a
VERO-S NSE plus quick-change pallet system plus or a WDA 99-70
direct clamping module can be controlled.
If a pneumatic clamping system is to be supplied with compressed
air on the clamping pillars, the closing nipples included in the
scope of delivery must be connected to the clamping system. In
the delivery state, the air connection for the system control is
closed with a G1/8" locking screw.
Mounting and connection WDB 99-60
