Operation
04.00|1411420_NSE mini 90-25, NSE mini 90-25-V10 |en
29
Operation
CAUTION
When changing the pallet using lifting equipment or a robot,
ensure that the pallet is lifted exactly parallel to the clamping
modules.
The inclination (X) during lifting may not exceed 1.2°.
If the inclination is larger, the clamping pins can jam and the
system components could be damaged or destroyed. In this
case, the system must be inspected and damaged parts must be
replaced immediately.
Only original SCHUNK spare parts may be used.
DANGER
Danger of the object to be clamped falling down if it is not
secured against uncontrolled movements. If the clamping
module is unlocked when the clamping pin axis is horizontal or
upside-down, the object to be clamped may fall down.
•
If it is horizontal or upside-down, the object to be clamped
must be secured against uncontrolled movements before the
clamping module is unlocked.
•
During operation, incorrect or negligent loosening of the
clamping pin must be prevented using suitable
countermeasures (disconnecting the power supply after
locking, use of check valves or safety switches).
5
