Basic safety notes
04.00|1411420_NSE mini 90-25, NSE mini 90-25-V10 |en
15
Notes on particular risks
DANGER
When operated with inert gas, there is a danger of suffocation
due to escaping inert gas as a result of leakage.
•
Provide a gas warning system according to DIN EN 45544-
4:2017-01.
•
Observe maintenance and inspection intervals.
•
In case of discomfort or dizziness, leave the premises
immediately, report any symptoms and go out into the fresh
air.
DANGER
Risk of injury if the clamping pin, the mounting screw of the
clamping pin, or the clamping module breaks when overloaded
and the object to be clamped is released uncontrollably.
The product must never be operated outside its appropriate use.
WARNING
The system clamps using spring force. Risk of injury due to parts
automatically moving to their end positions following actuation
of an "emergency stop" or after switching off the power supply.
•
Wait for the system to shut down completely.
•
Do not reach into the centering hole when the power supply is
connected.
•
Use pressure maintenance valves.
CAUTION
Risk of crushing the limbs when reaching into the centering hole
during the actuation process, in the event of a pressure failure
or inadvertent actuation of the product.
•
Wait for the system to shut down completely.
•
Only reach into the centering hole when the power supply is
disconnected (e.g. for cleaning purposes).
•
Prevent power supply from inadvertently being activated.
2.12.4
