SCHUNK ROTA THW3, Сборка и руководство по эксплуатации

Страница: 42 / 56

Maintenance
42 06.00 | ROTA THW3 | Power Chuck | en | 1440828
Pre-assembly of thrust jaw
Push the monitoring pin (item 8) on the flat surface
or the thrust jaw (item 2) to release the driver (item
6). Pull the driver downwards out of the thrust jaw.
Remove the compression spring (item 70) and
cylindrical pin (item 67) from the bore hole in the
thrust jaw. Remove retrieval element (item 16) incl.
spring (item 75) from the driver (item 6).
Assembly:
First insert the driver (item 6) into the top of the
thrust jaw and only then press in the cylindrical pin
(item 66). Ensure correct alignment of the retrieval
element!
Remove O-ring (item 43) from the driver (item 6)
and push out the cylindrical pin (item 66).
Remove the pin (item 65) from the bore hole and
push the monitoring pin (item 8) incl. O-ring (item
42) out of the thrust jaw.
Remove the locking pin (item 9), spring (item 63),
washer (item 62) and safety ring (item 61) from the
bore hole.