SCHUNK ROTA THW3, Сборка и руководство по эксплуатации

Страница: 39 / 56

Maintenance
Checking correct functioning upon jaw change
The mechanics of the jaw change notching/serrations must be
checked at regular intervals; at the latest at the specified
maintenance intervals. To do this, insert the jaw change key (item
20) into the eccentric bolt (item 4), and turn anti-clockwise to
"change" position and remove base jaws from the chuck.
• Visual inspection of the serration for damage.
• In the "change" position, the serrations must be fully recessed.
• The monitoring pin (item 8) must have come out.
• It must not be possible to turn the jaw change key to the "lock"
position without the base jaw.
• In the "change" position, the jaw change key cannot be
removed.
NOTICE
Only adjust the chuck from the "change" to the "lock" position
with the jaw correctly inserted. Do not apply excessive torque
to the jaw change key. Risk of damage to the lathe chuck.
7.3 Maintenance intervals
After one year, or after 250,000 clamping cycles, the chuck must
be disassembled and completely cleaned.
Lubrication of the chuck
} 7.1 [
/
37] must be carried out at the
following intervals.
Lubricating the greasing areas:
Interval Demands
every 30 days or
after 50,000
clamping cycles normal / use of coolant
every 15 days or
after 25,000
clamping cycles high / use of coolant
39 06.00 | ROTA THW3 | Power Chuck | en | 1440828