SCHUNK ROTA THW plus 165-43 Скачать руководство пользователя страница 33

Страница: 33 / 45

Function and handling

01.00|ROTA THWplus |en

Function and handling

The item numbers specified for the corresponding individual com-

ponents relate to chapter drawings.

(



12, Page 41)

Function of the chuck

The type THW plus quick-change power chucks are actuated using

a rotating solid or through-hole cylinder. The axial tensile or com-

pressive forces are converted to the radial jaw clamping force via

wedge bars positioned tangentially to the chuck body.

Handling the chuck and the base jaws

The clamping and opening path of the chuck jaws is prescribed by

the clamping cylinder. The base jaws with screwed-on top jaws are

moved or changed in the open clamping position. For safety rea-

sons, the serration for the base jaws is still engaged in this chuck

piston position. The base jaws are unlocked manually.

CAUTION

There is a risk of crushing during manual loading due to the

large jaw stroke.

We recommend automatic loading.

If manual loading is used, set up the jaw position so that there is

no risk of injury when inserting the parts. The maximum opening

gap must be less than 4 mm when the workpiece is in contact

with one of the jaws.

For each jaw guidance, a jaw-change bolt (item 8) with hexagon

socket (which can be turned using the jaw change key (item 90)) is

arranged on the chuck perimeter. Turning the jaw-change bolt

moves the serration for the wedge bar (item 9) axially against

spring pressure out of the serration for the base jaw (item 2). In

this position, the base jaws can be moved or changed radially in-

wards or outwards. It is not possible to pull out the jaw change key

in this position.

Der Ausklinkschlüssel wird verriegelt, solange keine Spannbacken

in den Funktionsbereich gebracht wurden! Der Funktionsbereich

bedeutet, dass die Grundbacke im Eingriff der Verzahnung des

Winkels ist.

8.1

8.2

Содержание ROTA THW plus 165-43














































Результаты поиска

Содержание ROTA THW plus 165-43

Отзывы:

Бренды по названию

Популярные бренды

SCHUNK ROTA THW plus 165-43, Сборка и руководство по эксплуатации

Результаты поиска

Содержание ROTA THW plus 165-43

Отзывы:

Бренды по названию

Популярные бренды