SCHUNK ROTA THW 1000 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 45

SCHUNK ROTA THW 1000 Скачать руководство пользователя страница 29

Function

02.00|ROTA THW / THWB |en

29

Handling the chuck and the base jaws

The clamping and opening path of the chuck jaws is determined by

the clamping cylinder. The base jaws with screwed-on top jaws are

moved or changed in the open clamping position. For safety

reasons, the serration for the base jaws is still engaged in this

chuck piston position. The base jaws are unlocked mechanically.

CAUTION

Danger of limbs being crushed by opening and closing of the

chuck jaws during manual loading and unloading or when re-

placing moving parts.

•  Do not reach between the chuck jaws.
•  Automatic loading is preferred.
•  If manual loading is used, adjust the jaw position so that the

opening gap between the jaw and the workpiece is less than

4 mm.

• Wear protective gloves.
• Observe the safety and accident prevention regulations during

operation of the chuck, especially in connection with machin-

ing centers and other technical equipment.

For each jaw guidance, a jaw change bolt with hexagon socket

(which can be turned using the jaw change key) is arranged on the

chuck perimeter. Turning the jaw change bolt moves the serration

for the wedge bar axially against the spring pressure and out of the

serration for the base jaw. In this position, the base jaws can be

moved or changed radially inwards or outwards. It is not possible

to pull out the jaw change key in this position.

NOTICE

The chuck piston (item 3) must not be moved as long as the

chuck key (item 14) is located in one of the jaw-change bolts

(item 8) for the chuck.

Risk of damage to the chuck.

4.3

«
...
27
28
29
30
31
...
»

Содержание ROTA THW 1000














































Отзывы:

Нет отзывов