Maintenance
05.00|0889002_ROTA-S plus 2.0 |en
37
In the case of decreasing clamping force or after approx. 200
operating hours
If the clamping force decreases, the inside of the chuck is
contaminated or the coolant has washed out or decomposed the
grease.
In this case disassemble the chuck, carefully clean all parts with
degreasing agent and check for wear and damage.
Replace damaged parts with original SCHUNK spare parts only!
Before installation, lubricate all individual components with
SCHUNK LINOMAX plus special grease.
This cleaning procedure should be performed about every 200
operating hours, depending on the extent of stress on the chuck.
Maintenance intervals
Lubrication of the grease areas:
Lubrication interval Strain
every 25 hours
normal / coolant utilization
every 8 hours
high / coolant utilization
after 1200 hours or
as needed
Total cleaning with disassembly of the
chuck, depending on type and degree of
contamination
9.4
9.5
