Function
30
05.00|0889002_ROTA-S plus 2.0 |en
NOTICE
Actuating the chuck if a jaw is not engaged will damage the
chuck!
Manually move the jaw back and forth without actuating the
pressure bolt. This ensures that the jaw is engaged. The pressure
bolt has to be in the initial position.
For all the wedge bar teeth (items 5 and 6) to be supportive, the
base jaws in the guides must always be inserted at least up to the
marking line on the chuck body (item 1) (see Fig. "Jaw change").
All jaws have to be at the same marking line. An additional
actuating lock prevents the spindle from being turned to the right
without chuck jaws.
NOTICE
If force is used to continue turning, the chuck will be damaged
and the jaw lock function will no longer be active.
Do not forcefully turn the spindle further!
Only after all the clamping jaws have been inserted into the
guide will the actuating lock be unlocked. Then the wedge bars
can be shifted into working position. (Turn spindle to the right!)
In the event of noticeable resistance (jaw not engaged), do not
turn further forcefully. Slightly move the base jaw until it
engages.
The base jaws fit into the chuck in both directions. They can be
turned around.
Jaw change
