Basic safety notes
03.00|0889148_ROTA NCX |en
9
•
Screw the jaw mounting screws into the bore holes furthest
apart.
•
The jaw fastening screws must be replaced if they show any
signs of wear or damage. Only use screws with a quality of 12.9.
Environmental and operating conditions
Required ambient conditions and operating conditions
Incorrect ambient and operating conditions can make the product
unsafe, leading to the risk of serious injuries, considerable material
damage and/or a significant reduction to the product's life span.
•
Make sure that the product is used only in the context of its
defined application parameters,
•
Make sure that the product is a sufficient size for the
application.
•
Only use high-quality cooling emulsions with anti-corrosive
additives during processing.
Clamping force tester
Depending on the operating conditions, the function and clamping
force must be checked after a certain period of operation
. Only use a calibrated clamping force tester for
measuring during the clamping force test.
With the smallest possible actuating pressure (clamping cylinder),
the base jaws should move evenly. This method only provides a
limited indication and is not a substitute for measuring the
clamping force.
If the clamping force has dropped too much or if the base jaws and
pistons no longer move properly, the chuck must be disassembled,
cleaned, and relubricated
2.6
