Maintenance
36
03.00|0889148_ROTA NCX |en
Maintenance
Lubrication
To maintain the safe function and high quality of the chuck, it has
to be regularly lubricated.
Lubrication
A
Three lubrication nipples on the chuck perimeter (3 x 120°)
Move the chuck into the closed position. Lubricate the chuck at
the three lubrication nipples (
A
- see Fig. "Lubrication") using a
high-pressure grease gun with two to six strokes (depending on
the chuck side) of SCHUNK LINO MAX special grease at each
nipple.
For optimum grease distribution, the clamping piston must travel
the entire clamping stroke several times after lubrication.
Check clamping force, repeat procedure, if necessary.
Chuck Size
165
210
260
315
Number of strokes
2
4
4
6
Lubricate all three segments evenly in order to avoid imbalances.
(For product information about LINO MAX, see the "Accessories"
chapter of the SCHUNK lathe chuck catalog or contact SCHUNK.)
7
7.1
