SCHUNK PFH 150, Сборка и руководство по эксплуатации

Страница: 7 / 40

General
08.00 | PFH 150- 300 | Assembly and Operating Manual | en | 389270
7
1.4 Accessories
The following accessories, which must be ordered separately, are
required for the product:
• 2 Top jaws
• Sensors, if required with extension cord
Sensors [
}
7]
A wide range of accessories are available for this product
For information regarding which accessory articles can be used
with the corresponding product variants, see catalog data sheet.
1.4.1 Sensors
Overview of the compatible sensors
Designation Type
Inductive proximity switches IN 80-S
Magnetic switch MMS 22
RMS 22
• Exact type designation of the compatible sensors see catalog.
• Information on handling sensors is available at schunk.com or
from SCHUNK contact persons.
1.4.2 Seal kit
ID.-No. of the seal kit
Seal kit for ID number
PFH 150 - 300 0302025
Contents of the sealing kit, Assembly drawing [
}
35].
1.4.3 Accessories kit
Content of the accessory pack:
ID.-No. of the accessory pack
Accessory pack for ID number
PFH 150 - 300 9939381
Centering sleeve Ø14 x 8.6mm (4x)
9682058
Cylindrical pin ISO 8734 8.0m6 x 20mm
9611222
DIN 3771 NBR 70 15.55 x 2.62mm